The imprinter is used on the impulse and constant foot sealers and auto sealers, the letter will be printed inside & outside of the sealing wire. If you sealing the liquid packaging and the powder packaging, you have better use the outside sealing wire type of printer to code or date, it could avoid the bag leaked while you code or date on the bags. Or you can use the inside sealing wire type for general bags.

Specifications:

660HS, 669HS

--For Inside device type

661HS, 661-B

--For constant sealers use

662HS, 662-B

--For Impulse sealers use

Features:

*For all the foot type and auto type impulse & constant sealer

*660HS, 661HS, 662HS

--Can print 2 lines, 14 letters per line(2*4mm Letter)

*661HS-B, 662HS-B, 669HS

--Can print 3 lines, 14 letters per line(2.5*4mm Letter)

The imprinter is auto type and suitable for most of plastic materials, alum. Materials and paper or box. It with the sensor works quickly and printed clearly, suitable for mass production.

Specifications:

664HS

Features:

*For most of the plastic bags, alum. Bags and paper boxes.

*Can print 3 lines, 14 letters per line

*With sensor and foot switch

The manual type imprinters can print the date on most of the plastic bags, alum. Bags and boxes. It’s rinted clear and easy to use. Special design of the temp. control installed that can make the letters warm quickly, also we have hand press(666HS) and foot manual (667HS) two types.

Specifications:

666HS

--Hand press type imprinter

667HS

--Foot type imprinter

Features:

*Mamual type imprinter

*Can print 2 lines, 14 letters per line